|
Expand MediaScreen 2 outdoor is a double-sided marketing display that is unique on the market, as it is the first fully portable retractable banner for outdoor use. Our Research & Development Department has set out to combine all the advantages of a retractable banner with the demands for stability and durability in all kinds of weather conditions.
* Includes two graphics, all hardware and two carrying bags
PRODUCT OVERVIEW
User-friendliness combined with stability and durability
Our Research & Development Department has set out to create a product that is both easy to carry and set up, and that meets the demands for stability and durability in different weather conditions and on different surfaces.
Patented, Spring-Loaded Pole stands up to strong winds
Expand MediaScreen 2 outdoor has a flexible support pole with a fixed height. Our patented pole combats wind by flexing to take the blow and springs your graphic back into action when the wind subsides. The bottom of the foldable pole has been designed specifically to prevent rotation.
Support feet for high stability
To prevent the product from overturning in strong winds, the Expand MediaScreen 2 outdoor is equipped with support feet that you add or remove in one simple operation. Optional soft surface stakes are available to provide extra stability on surfaces such as dir t, sand, grass and snow.
Carefully selected materials for long durability
The product is manufactured in high quality materials that resist corrosion, UV-radiation and wear and tear even during long term outdoor use. The product can be used in almost all weather conditions and on most kinds of surfaces such as sand, snow, asphalt and grass. The base is equipped with drainage holes to let water and particles out.
Powerful clamp profile
The clamp profile for Expand MediaScreen 2 (outdoor) is equipped with an extra powerful locking function to ensure that the graphic stays attached in all weather conditions. The profile has a special grip where the support pole is attached for better stability.
Thoroughly designed
This product has an obvious resemblance to Expand MediaScreen 1. The ends are chrome-colored and the base is matte silver.
Recommended printing materials
We recommend printing on a weather-resist and material such as a vinyl banner material or synthetic paper.
Bags
Delivered in two black, padded nylon bags. The outdoor product is separated in two bags (the base in one bag; pole and support feet in another) for easy transportation.
Size and weight
Width: 33 7/16" (85 cm)
Height: 70 7/8" (180 cm)
Weight: approx. 30 lbs (14 kg) equally divided in two bags.
Please Note
- Both graphics must be pulled up to balance the product.
- The product bends in strong wind and should therefore be placed with free space behind and in front of it.
- The graphic is fully visible in wind speeds up to 22 MPH (10 m/s). The product can be used in higher wind speeds, but the message will then lean too much to be considered fully visible. The graphic leans 60° in 22MPH (10 m/s) of wind.
- When mounting the graphic, use a tape in the lower end that it especially adapted for outdoor use.
- Expand MediaScreen 2 outdoor can be used indoors as well. When used indoors, the support feet are not necessary.
|